DD39AJPA DD39AJPB 20W Boost-Buck Dual Output Module – DC 3.6-30V to ±3-30V Adjustable Step-Up/Down Converter for Audio Op-Amp Dual Power Supply
DD39AJPA DD39AJPB 20W Boost-Buck Dual Output Module – DC 3.6-30V to ±3-30V Adjustable Step-Up/Down Converter for Audio Op-Amp Dual Power Supply
Product Name: 20W Boost-Buck Dual Output Voltage 3.6-30V to +-3-30V Adjustable DC DC Step-up Boost-Buck Converter Module
1 PCS 20W DC DC Boost-Buck Converter Positive and negative voltage Dual voltage Module
Description:
Input voltage 3.6~30V,output ±3~±30V adjustable
Maximum output power: 20W (For details, please see the description at the bottom or ask us for information.)
Conversion efficiency :69-88%
Quiescent current: 3mA
20W DC-DC Boost-Buck Converter working frequency 180KHZ.
Operating ambient temperature : -40~+85 Degrees Celsius
Size : 60 x 34 x 15mm
Weight : 33g(With terminal), 29g(no terminal)
High efficiency up to 88%
Built in Frequency Compensation
Built in Soft-Start Function
Built in Thermal Shutdown Function
Built in Current Limit Function
Note:
1 In order to obtain a more stable voltage, it is recommended that the output is greater than 15MA
2
V- cannot be used alone, or no voltage output.But you can just use V+
3 The startup current of the module is 2.5-3 times the operating current.
4 Increasing the 1UF-10UF MLCC capacitor reduces the startup current(As shown below)
Applications
ADC/DAC/Operational Amplifier
RS232 RS485 RS422 Bus
Audio equipment
Low power audio power supply
Car audio amplifier dual power board
LCD power supply
Instrumentation equipment
Instrumentation multimeter
Attention :
This is a DC-DC voltage converter module,Must be noted when using:
1 Input voltage can not be greater than the maximum input range
2 Output power can not be greater than the maximum load for a long time
3 Input power must be greater than the output power, because the power consumption of the module itself
Q & A:
Q1 : Why output voltage is less than the nominal voltage
A1: Input power supply power is too low.Test the input voltage with a multimeter,a t this time of the input voltage is very low
Q2 : Why is the negative voltage not output or the output too low?
A2 : The negative voltage cannot be used alone. When using a negative voltage, the same load must be connected at the positive voltage terminal.



The maximum output power can reach 20W, but the maximum power will vary under different conditions.
For details, please refer to the following table
(
10-80% of the maximum power is the most reliable)
:
5V/±5V Output
6V/±6V Output
9V/±9V Output
10V/±10V Output
12V/±12V Output
15V/±15V Output
24V/±24V Output

|
Click on the picture or search SKU for product details |
||||||||
|
We are a professional manufacturer, if you don't find the product you need, please contact us directly. |
||||||||
|
Product |
SKU |
Click Picture |
Description |
|||||
|
Boost-Buck |
DD0315NA |
|
Input voltage : DC +3~+15V, |
|||||
|
Boost-Buck |
DDUB12NA |
Input voltage : DC +4.8V-+28V, |
||||||
|
Boost |
DD1718PA |
Input voltage : DC +3~+18V, |
||||||
|
|
DD39AJPA |
Input voltage : DC +3.6~+30V, |
||||||
|
Boost-Buck |
DD1912PA |
Input voltage : DC +3~+24V, |
||||||
|
1% +/-voltage |
ZD3605PA |
Input voltage : DC +-3.5~+-20V, |
||||||
Product features
Product features
Materials and care
Materials and care
Merchandising tips
Merchandising tips
Share






